4040 RO membrane
Product Description
Industrial 4040 RO membrane
Product Info
| Minorder | 1 |
|---|
Product Detail
4040 RO Membrane DataSheet:
| Model No. | RM-BW-4040 | RM-ULPH-4040 | RM-ULPD-4040 | RM-ULP31-4040 | RM-BW-4040FR | RM-SW1-4040 | |
| Performance | Desalinization rate % | 99.5 | 99.3 | 99.1 | 99.5 | 99.5 | 99.6 |
| Permeate Flow GPD (m^3/d) | 1900(7.2) | 1900(7.2) | 2000(7.7) | 2000(7.7) | 1900(7.2) | 1000(3.8) | |
| Effective membrane area ft^2(m^2) | 106(9.9) | 106(9.9) | 106(9.9) | 113(10.5) | 106(9.9) | 106(9.9) | |
| Feed water TDS less than ppm (mg/l) | 6000 | 3000 | 3000 | 3000 | 8000 | 40000 | |
| Test conditions | Test pressure | 150psi(1.03Mpa) | |||||
| Test fluid temperature | 25°C | ||||||
| Test fluid density (NaCl) | 1500ppm | ||||||
| Test fluid pH. | 7.5 | ||||||
| Single RO membrane element recovery rate | 15% | ||||||
| Operating conditions | Max operating pressure psi (MPa) | 600(4.14) | 600(4.14) | 600(4.14) | 600(4.14) | 600(4.14) | 1200(8.27) |
| Suggested operating pressure psi (MPa) | 225(1.55) | 150(1.05) | 150(1.05) | 150(1.05) | 225(1.55) | 650(4.5) | |
| The maximum water supply temperature | 45°C | ||||||
| The maximum water supply SDI | <5 | ||||||
| free chlorine concentration in water supply | <0.1ppm | ||||||
| Water supply pH scope when continuous running | 3~10 | ||||||
| Water supply pH scope when chemical cleaning | 2~12 | ||||||
| The maximum pressure drop of single RO membrane element | 10psi(0.07Mpa) |